Product Details
lt is suitable for processing special-shaped partsand is relatively economical.
Product Size
Product Parameters
| DIMENSIC/TYPE | Plunger Stroke(mm) | Jaw Stroke (Diameter)(mm) | Max.Speed(r.p.m) | Max.Pull Force (kgf) | Max.Gripping Force (kgf) | Matching Cylinder | Gripping Range Max Min | Max.Hydr. Pressure (kgf/cm²) | Net weight (kg) | |
| YS1-06 | 20 | 6.5 | 5000 | 1220 | 3460 | SH-100 | 165 | 22 | 19(1.9) | 13 |
| YS1-08 | 21 | 8.1 | 4000 | 1630 | 4990 | SH-125 | 210 | 24 | 16(1.6) | 25 |
| YS1-10 | 25 | 9 | 3500 | 1930 | 7140 | SH-150 | 254 | 27 | 19(1.9) | 37 |
| DIMENSION/TYPE | A(mm) | B(mm) | C (h6)(mm) | E(mm) | G(mm) | H(mm) | K(mm) | L(mm) | n(mm) | N max.(mm) | N min.(mm) | O max.(mm) | O min.(mm) | P max.(mm) | P1 min.(mm) | Q(mm) | R(mm) | S(mm) | T(mm) | U(mm) | V(mm) | W(mm) | Y(mm) |
| YS1-06 | 165 | 74 | 140 | 5 | 116 | 104.8 | 6-M10 | 14 | 20 | 37.8 | 33.55 | 18 | 7.5 | 101.5 | 81.5 | 31 | 12 | 36 | 4 | M16x2.0P | 34 | 39 | 73 |
| YS1-08 | 210 | 85 | 170 | 5 | 150 | 133.4 | 6-M12 | 18 | 25 | 46.3 | 41.9 | 22.5 | 9 | 127 | 106 | 35 | 14 | 36 | 5 | M20x2.5P | 38 | 42 | 95 |
| YS1-10 | 254 | 89 | 220 | 5 | 190 | 171.4 | 6-M16 | 20 | 30 | 51.4 | 47 | 37.5 | 10.5 | 158 | 133 | 40 | 16 | 36 | 5 | M20x2.5P | 45 | 46 | 110 |
-
BMT - 90 DEGREE DRIVEN TOOL HOLDER Technical advantages
Feb. 11, 2025
-
BMT - O DEGREE DRIVEN TOOL HOLDER Technical advantages
Feb. 11, 2025
-
Tool Holder Series Introduction
Feb. 11, 2025
-
Jan. 27, 2025
-
What Are The Benefits of Using A Hydraulic Chuck
Dec. 19, 2024
